Monday, September 2, 2013

AUTOart 1:18 Mazda 787B Le Mans Winner

Behold, the Lend. The Mazda 787B. 

Over the years, this car has slowly faded out of popularity. Only die hards and fans of Japanese motoring know the significance of this car. For a lot of people, it looks just like another race car with a bunch of sponsors and wild colors splashed all over it. But gather around children, because the pride of Japanese motor sports is a story that must be told. 

On June 23, 1991 this car was the first Japanese car (and still the only one) to win the Le Mans 24 hour race. All 3 cars finished very well with #55 finishing first. Mazda has been known for many years for their unconventional Rotary/Wankel engine. Sadly the discontinuation of the RX-8 last year meant the end of production cars utilizing the rotary engine, until Mazda gets their shit together and revives the RX-7 (we hope). What is special about this vehicle besides being the only Japanese car to win the Le Mans, is that it didn't win out due to pure speed, or 100% driver ability. It won due to its reliability and engineering. Several of the cars throughout the race had to be docked due to mechanical issues and several pit stops due to fuel usage. The 787B's more reliable and much less thirstier engine allowed the drivers to push the car harder without having to conserve fuel and significantly reduced down time related to mechanical issues. 

In the end, the car pushed forward and gained the lead 22 hours into the race and crossed the finish line in first. Today, this car still stands as one of the greatest Japanese made automobiles. Lastly, I leave you with two facts which would impress your friends if you knew:

1. After the season ,Wankel/Rotary engines were barred from future events because they were too bad ass
2. After the race, the engine was opened in front of press to inspect and there was not a single sign of wear. The engine could have ran for several more races. 

Obviously being a huge fan of Japanese automotive, I had to add this iconic car to my collection regardless of the price. I waited and scouted a long time before I was able to grab this car in a price range I was happy with. Eventually, that day did come and when I opened it up for the first time, I was blown away by all the details. The amount of detail in this model is insane. It features over 371 parts and I just took as many photo's of the details I could get. The amount of screws, rivets and metal pieces used all over is absolutely insane. I opened the model up after I got off work one day and next thing I knew it was very late at night. I spent several hours going over every crease, crevice and rivet admiring how they were able to accurately scale down such a beast of a vehicle. Overall, the car was worth every dollar and will be a homage to the greatness of Japanese motoring in my collection for many years to come. 

I know what else you are wondering. How much did I really pay for this model?

If I told you how much I paid for this model. I'd have to kill you. So enjoy the pics!






Limited edition, of course. #5686


The wheels are insanely nice. It has a polished metal lip that goes in pretty deep. Wheels have the proper labels on them, made by VOLK Racing, my favourite wheel company of all time. You can also see the nice Brembo brakes in the back. All the little rivets on the wheels are molded in very nicely and I love that metal center locking lug.



Another nice touch is that they have the wheel covers provided that you can place over. They are magnetic and an exact replica of the function the real car requires it for. The fins "turbine" air into the wheel to cool the brakes for long endurance races. 


Front and rear cowls both open up and both doors open upwards and forwards. 


The cowls are both detailed very well. They have a lot of markings and livery all over the body that took very extensive tampo application to achieve. Also the interior of the cowls are fully painted as well, whether it is carbon, black or paint. 





Interior is insanely detailed. The seats and steering wheel are accurately portrayed in an alcantara finish. Even the seats backing has a carbon fiber pattern. The seat belts are made of ribbon and the locking 5 point harness is replicated exactly. 


The front radiator is also anything short from impressive. The radiator is made entirely of layers of metal and even the tow hook/front clasps for the cowl are constructed of fine pieces of metal. The rivets are also replicated all over. 

One of my favourite areas on this model is the exhaust pipe on the right side. It's constructed and placed behind those metal fins. They replicated it fully. 



Sunday, September 1, 2013

Hot Toys Iron Man 3 Cosbaby Set (Series 1)

So I spent the weekend in Calgary, and unfortunately missed posting last night when I got back to my hotel room pretty late and dozed off immediately. So that's two I owe you guys. I'm keeping a tab. Wouldn't be the 30 day challenge if I didn't fulfill 30 posts (in my eyes)

So today, I bring you a pretty cool item. It has a weird background and it's the only single "format" of this kind of figure I own. Normally I buy several of the same format figures, but I haven't gotten around to picking up too many of these until this set came out. I'm not really a huge fan of buying several small figures and piecing together a collection. Especially those that come in "blind" boxes (boxes where you don't know which figure you're getting until you open it and the idea is that you try to complete an entire collection by trading with other people, scoping kijiji, putting bids out on ebay, selling parts of your collection to finish this one, remortgaging your house, selling a kid or two). But for this special set, Hot Toys put them out in 1 go in a single package. Kick ass. 100% of the set. 0% of the pain.

Hot Toys - Hot Toys is a pretty big name in the collector industry now. They've taken collectors by a storm because of their 1/6 (12") figures. If you follow my blog you've probably seen a few reviews. But if not, there they are:


Since then, they have expanded to a few new lines with one of the newest being the "Cosbaby" format. They consist of a "super deformed" figure which has a big head, large anime style eyes and a smaller body. They stand close to 3" high and contain quite a bit of articulation than most figures this size.

Onwards to the box set:






Although the bos says Iron man 3 Cosbaby set, this set actually contains every Iron Man armour in Iron Man 1, Iron man 2, and avengers. If they were to add Iron Man 3, I don't know how big the set would be with the introduction of 35 new armours as part of the "House Party" protocol. 

So just gonna give you guys a quick lo-down on the armours in this set incase you aren't as Iron Man armour savvy:

Tony Stark when he is testing out his armour in Iron Man 2 with one gauntlet and one boot on:


Seen in Iron man 1. This is the first armour he built in "a cave with nothing but scraps" which allows him to escape and return back to North American society. 


Iron Man Mark II. Used as just a test armour for flight in Iron man 1. Later Rhodey fights him when he's being an asshole at some party and takes it to the U.S. Government where it is converted to "War Machine"

Iron Man Mark III. The armour used at the end of Iron Man to fight the Iron Monger. Aesthetically it looks just like a repaint of the Mark II and also weaponized. 

Mark IV. First armor seen in Iron Man 2. The one Tony Stark gets drunk in and uses to destroy his mansion. He gives up this armour because of the palladium poisoning which is used to run the Arc reactor. 

Mark V. Also known as the suitcase armour, Tony Stark uses this as a portable armour when he travels. Used to fight whiplash for the first time during the F1 race in Iron Man 2

Mark VI. Final armour created in Iron Man 2 by Tony Stark. It is powered by the new Arc Reactor Tony creates from vibranium which allows for a much higher power output than his previous suits. He also uses this armour at the beginning of The Avengers where he goes up against Thor for a short while. 


Mark VII: Tony Stark created this as an iteration after the Mark VI but was not complete when the Chitauri attacked. It features an ability to automatically build up around the wearer when called upon which was the first of many suits which automatically deployed.


Friday, August 30, 2013

VOLK TE37SL Black Edition

So earlier this summer I changed my wheels and did a review video with my GoPro as well.

The wheels I got were Volk TE37SL Black Edition by Rays Engineering. The TE37's are a trademark wheel in the Japanese tuning car community and the SL's stand for "Super Lap" which have more advanced forging methods to make the wheel even lighter.

This article has a great history on the heritage of the infamous Volk TE37:
https://www.speedhunters.com/2013/05/touring-evolution-the-volk-racing-te37/

The reason behind the price of these wheels are that unlike conventional wheels which are cast, these wheels are forged.

Cast Wheels:
Cast wheels are molten metal that's poured into a mold then cooled. Most of the wheels on the market are cast and most of the cars we buy come with cast wheels. The result is that when molten metal is poured into a mold and cooled, it may introduce uneven metal composition, air bubbles, pores, or weaknesses somewhere in the wheel. The result of this weakness is that the wheels must be bigger, heavier or stronger to accomodate the forces that the car is undergoing under any hard driving.

Forged wheels:
Forged wheels are where the metal (normally aluminum) is a solid "billet" and a very high pressure press machines compresses this metal into the wheel's shape under extreme heat (Ray's uses a 10,000 ton forging machine to do this). The result is that the solid piece of metal has the metal grain structure internally aligned and pressed very tightly. This results in an extremely much stronger wheel. Because the forging technique produces a much stronger wheel, it can be cut to be lighter without losing any functionality, or risking reduction of the wheels reliability.

So the main pursuit of buying forged wheels is to make them lighter. But how much lighter? In most cases, it's only a few lb's difference. But the key is that your wheel isn't stationary mass. It's rotational mass, and when you can remove unsprung weight in these key areas, it can aid in faster acceleration and taking some of the "lugginess" of heavier wheels.


Thursday, August 29, 2013

Tamiya TT-01 86 With Upgraded Motor

So last week I showed you guys a post of my replica-of-my-real-car rc car. It was already pretty quick, but because I was running the motor so much it started dying off and seemed to be running a bit slower.

The result was that I needed an upgrade. I showed you guys the part here and took me some time to take it apart and install the new motor with the heatsink/fan and new fan combo. I also put in ball bearings and an aluminium drive shaft.

I told you guys I would try to use my GoPro and I never tried using it in the dark, so I took it out today and gave it a shot. Unfortunately, it doesn't look that crisp in the dark, but it does give you a good idea of the speed the new motor gives me:


Pretty speedy eh?

Modding RC Cars is way cheaper than modding a real car. And no gas to burn. Woo hoo.

Wednesday, August 28, 2013

AUTOart 1/18 Lexus LFA in Whitest White

Have I got the model for you guys. The last two I reviewed were in the $15 segment, so I decided to pull this guy out of the display case. Although the Aventador is one of my new flagships in my collection, this model, the Lexus LFA (non-nurburgring edition) is definitely my most rare and valuable model.

I bought it right when it was released so I paid retail price, but because of its rarity, especially in this "Whitest White" the price of this model has skyrocketed to above a $300 price point.

AUTOart link: http://www.autoartmodels.com/web/product/en/1809

AUTOart also has released the Nurburgring Package LFA for their second release which has different wheels, a new front lip, a static spoiler and some carbon canards. The second release didn't build the hype the first model generated, so people are still after the original non-nurburgring LFA and last time I checked, the price has only kept rising. But onwards to the review!

AUTOart link for Nurburgring Package LFA: http://www.autoartmodels.com/web/product/en/2069

The AUTOart Signature models are their "range-topping models" and are packaged differently than their standard vehicles. The entire vehicle is enclosed in a custom made Styrofoam shell and slid into a cold pressed paper box with metallic embossing all over. They also normally feature a certificate of authenticity and a numbering since most of them are limited runs. In this case, mine is 1699/5000

It also comes with a little booklet highlighting the technology, difficulties and breakthroughs that they have used to produce a model of this accuracy. It states that this model is composed of 284 individual parts.



I'm just gonna jump straight to one of the greatest things on these AUTOart models. ENGINE BAY DETAIL. HOLY SHIT! Well hopefully if you're paying 10x more than the Maisto/BBurago models, you'd have a proper engine bay. I encourage you to blow up the following pictures:



You can see that not a single corner was cut in replicating the engine in detail. The valve cover has an embossed F logo plate smack dab right in the middle. The spark plugs, wires and block are all molded separately. The carbon strut bar has been replicated very accurately. Even where the wind shield wipers are you can see vents are used and all the stickers/warning decals are replicated to the fullest. The hood is painted black on the inside and real mesh is used for the hood grills. Also you can see the ridiculous amount of detail used in making the hinges for the hood. The hood can pretty much be held up stiff at any angle from full open to full close.

My next favorite bits on the car are the wheels. They are made very nicely and I can't see a single mold line on them. The black chrome finish really stands out and they put in a lot of effort in making the brakes big, bright and filling behind the rim. It also features a metal Lexus emblem on the center cap and the brake disc texture resembles the carbon ceramic brakes on the real car. If you look closely you can also see the Lexus F trademark logo in metal on the fender.


Just like on the Aventador, metal mesh is used on all the vents and grills:



The middle of the rear of the car also has some pretty nice bits including the exhaust, emblems and the vent right under the rear spoiler:


Another one of my favorite...ah. shit. I said that too many times. Every part on this car is my favorite. This is one of my favourite models. It's just so detailed in all the places that matter and even in all the places it doesn't matter. It's just stupidly nice. But anyways, the spoiler is another one of my favorite features on this model. There's a switch on the underside and when you press it, the spoiler pops up. The spoiler can also be moved in varying degrees like the real car and the metal pistons are painstakingly simulated by AUTOart in achieving this movement:



Unfortunately, I couldn't get my photo's looking good for the interior. The interior is absolutely mental too. This photo you can see how nicely the seats are shaped and molded and I have some final shots of the entire car so you can appreciate dem lines





Tuesday, August 27, 2013

Lego Reimagination

Today I didn't get a chance to go home tonight and write a post or take pictures. My girlfriend's sister is moving to Toronto tomorrow for grad studies and we were helping her do some prep, packing and sharing good byes. She also had a final goodbye party and one of her gifts she received was a large Lego "pick-a-brick" cup.

I grew up playing with a lot of Lego. I mean a TON of Lego. I have several large buckets which at the times was a huge collection, but by today's Lego collector standards it may not wow as many people. Lego was definitely a staple of my childhood, but I never started collecting Lego as an adult because I knew I was short of space and it'd be a never ending collection. I regularly use to build random things and take it up to my Grandpa's room to show him the things I built. After he passed away a decade ago, I stopped playing with Lego and it's since sit in storage in those large bins. 

Recently in Edmonton we had the privilege of an official Lego store opening this summer and with it a lot of new Lego specials can now be purchased locally. Of course I was at the store opening day and got one of the mini-figure exclusive sets I'll have to show you guys another time. 

One of the features of the Lego Store is you can purchase a big cup of Lego and fill it with "pick-a-brick" assortments. Last night, she received one of these large cups and it was full of random Lego pieces her friends had picked for her. They kept mentioning that nothing could be built from it and that it was just to accessorize a Lego Avengers Quinjet they also bought for her.  

CHALLENGE ACCEPTED. I cracked it open and started building.  Eventually it grew and next thing I knew I was using up most of the pieces in that cup. I really wanted to use up 100% of the cup, but due to the nature of the leftovers I wasn't able too, but got pretty damn close. BEHOLD!


Leftover pieces in the cup:


What am I beholding? I know. It looks like shit. But at least I could prove you can kinda use your (my) shitty imagination when playing with Lego. Or what you have left at the age of 23. Pretty much nothing...It looked better in person. I swear, peeps. 

Okay, the cup had like a dozen chairs in it. what the fuck can you do with a dozen Lego chairs...